Industrial panel

#245163 by prochj51 Industrial panel was created by prochj51 Hi,
I could not find relevant thread on the forum, but I suppose I have read it in the past-

Have anyone of you have experience with some kind of industrial panel like this Industrial Panel and its use with linuxcnc?
I suppose it will have many power saving features.

Thank you
George

Please Log in or Create an account to join the conversation.

#245178 by Rios Replied by Rios on topic Industrial panel Some questions , do the Industrial Panel serve as monitor only or it's a full pc ?

If it's serve as only a HMI , i see no problem , power it on and connect the touch and vga signal to a pc running linuxcnc and from there it's like any other linuxcnc setup , but if the product is a Embedded pc and monitor , then you need to be more careful about the i/o's when choosing what you want .

Please Log in or Create an account to join the conversation.

#245188 by tommylight Replied by tommylight on topic Industrial panel That is a simple monitor with touch screen.

Please Log in or Create an account to join the conversation.

#245193 by prochj51 Replied by prochj51 on topic Industrial panel Sorry, wrong link. This one is correct Industrial Panel Edited . I meant all in one panel.

Please Log in or Create an account to join the conversation.

#245199 by tommylight Replied by tommylight on topic Industrial panel 785 Euro for a 19 inch, 4:3 aspect ratio monitor, that will most probably have mediocre picture quality at best?
Personally, i got a Dell 23 inch touch screen with full HD resolution, a Dell 9020 PC with Core i3, 8GB RAM, 128GB SSD, for 250Euro. Much better screen ... immensely better picture quality and faster PC.
They are used.
Again, personally i do not do "industrial PC", worked with those for over 15 years, the only thing industrial on them is the metal casing. The hardware inside is inferior, always.

Please Log in or Create an account to join the conversation.

#290192 by Wiktorjan Replied by Wiktorjan on topic Industrial panel When it comes to panel PCs, industrial PCs, I have never ordered from Aliexpress, somehow it doesn't appeal to me i.e. their quality. Personally, I have experience with an industrial panel computer from Nodka, precisely the iTPC-H1012 model, 10.1 inches. I installed it in a home workshop about 2 years ago and it has worked without any problems so far.  

Please Log in or Create an account to join the conversation.